What are the advantages of using a combination lock for a switchgear door lock?

February 22, 2020

Switchgear is one of the most common chassis in our daily lives. There are also a lot of locks used, such as handle locks, cam locks, and password locks. Today, Xiaobian will share with you the switch cabinet door locks. What are the advantages of using a password lock?
1. The switch door lock is easy to operate, similar to dialing. For single-axis operation, enter the password for a half turn and reverse the half circle to unlock. Short operating time.
2, the switch cabinet door lock password is large, there are millions of actual passwords, and the full array of passwords, you can choose freely, there is no limit.
3. When the switch door lock is unlocked, the code can be automatically destroyed without leaving traces. It is also impossible to test the password.
4, the number of passwords for the switch cabinet door lock can be set freely, simple and random. Currently the maximum 4 digit password.
5, full mechanical structure, no power supply, can adapt to a variety of harsh places.
6, off the switch cabinet door lock volume is small, and the ordinary door lock is almost the same.
7. The switch door lock is suitable for use in the lockout mechanism of the vault door, safe, and important places.
Xiamen Meike Security, is a lock-up enterprise that integrates research and development and production for more than ten years. It mainly engages in cabinet cabinet locks, password locks , electronic locks, etc. You are welcome to call us.

Glazed Tile And Ridge Cap Roll Forming Machine

 

Working principle:

steel strip is made into glazed tile by machine through cold-bend forming technology.

 

Usage:

Glazed tile produced by roll forming machine are widely used in construction, transportation and other industries. It is mainly used for roofing and wall of buildings, such as steel structures, airports, storehouses,etc.

 

Component:

1.Decoiler 

2.Roll Forming System                

3.Cutting Device           

4.Hydraulic Station        

5.PLC control system       

 

Working Flow:

Loading coil – decoiling – guide feeding – main roll forming – hydrarlic cutting – finished products

Working Flow

 

Corrugated Roof Roll Forming Machine Technique Parameters:

 

Processing material: aluzinc/galvanized steel/colored steel coil

Material thickness: 0.3-0.8mm

Main motor power: 4kw(can change as request)

Pump power: 4kw

Shaft diameter: 75mm and solid shaft

Forming steps: 15steps and more

Roller material: high grade 45# steel, hard Chromium plating

Main frame:300H steel

Medium plate thickness: 16mm

Speed:8-12m/min

Material of the cutting blade:Cr12

Control system: PLC computer control

Power supply: 380V, 3 Phase, 60Hz (can change as customers request)

 

Glazed Tile profile series:

glazed tile1



 glazed tile3

glazed tile2

Our Glazed Tile And Ridge Cap Roll Forming Machine can greatly simplifie the production process and improve production efficiency.

Welcome visit our Factory!

 

Glazed Tile And Ridge Cap Roll Forming Machine

Ridge Cap Roll Forming Machine,Glazed Tile Roll Forming Machine,Metal Roof Ridge Cap Roll Forming Machine

CANGZHOU DIXIN ROLL FORMING MACHINE CO., LTD , https://www.hebeimachine.com