Vertical Petrochemical Processing Pump/Single-Stage, Single-Suction Centrifugal Pump Refinery, Chemical
IS, ISR, ISY series centrifugal pump Copper Brazed plate heat exchangers，Copper base brazing, copper brazing process, brazing copper parts, copper brazing techniques Siping Juyuan Hanyang Plate Heat Exchanger Co., Ltd , https://www.tj-heatexchange.com
This series is a single stage, single suction, cantilevered centrifugal pump, manufactured strictly according to the ISO2858 standard. It is used for delivering clean water and liquids with physical and chemical properties similar to clean water, without solid particles.
Capacity: 3~500 m³/h
Head: 3~150 m
Working Pressure: 1.6MPa
Working Temperature: 85~130ºC
Seal Type: packing, mechanical seal
SH, S, SA series double suction axial split centrifugal pump
This series is a single stage, double suction, axial split centrifugal pump, used for delivering liquids with physical and chemical properties similar to water. It is widely applied in water supply and drainage systems, mining, cities, power stations, farmland irrigation, drainage, and large-scale hydraulic projects.
The inlet and outlet are both located on the pump axis, in horizontal direction perpendicular to the axis, easy to maintain and low cavitation.
Capacity: 126~10080 m³/h
Head: 8.6 ~140 m
Working Pressure: ≤1.6 MPa
Working Temperature: ≤130 ºC
Seal Type: packing, mechanical seal
SN series double suction axial split centrifugal pump
This series is a single stage, double suction, axial split centrifugal pump, used for delivering clean water or corrosive liquid. It is widely used in water supply systems, chemical mines, irrigation systems, and large-scale hydraulic projects.
The inlet and outlet are both under the pump axis, in horizontal direction perpendicular to the axis, high efficiency, low cavitation, noise and vibration reduction, easy to maintain.
Capacity: 1000~12000 m³/h
Head: 12 ~120 m
Working Pressure: ≤1.6 MPa
Working Temperature: ≤130 ºC
D, DF, DY, MD series multistage sectional centrifugal pump
This series is a single stage, multistage, sectional centrifugal pump, with horizontal inlet and vertical outlet. It is used for delivering clean water or non-corrosive liquids. After changing the material, it can also deliver hot water, oil, corrosive or abrasive liquids. It has advantages such as high efficiency, low noise, long service life, and wide performance range. Manufactured according to GB5657 standards.
Capacity: 3.75~850 m³/h
Head: 19~916 m
Temperature:
D, MD: ≤80 ºC
DF, DY: -20~105 ºC
Seal Type: packing, mechanical seal
DG series high pressure boiler feed water pump
This series is a single suction, multistage, sectional centrifugal pump, used for delivering clean water or non-corrosive liquids. After changing the material, it can also deliver corrosive liquids. It has advanced structure, good performance, energy saving, suitable for boiler feeding, factory and city water supply.
Capacity: 45~750 m³/h
Head: 740~2150 m
Working Temperature: ≤210 ºC
Seal Type: packing, mechanical seal
DC, DCF series boiler feed water pump
This series is a single suction, multistage, sectional centrifugal pump, a low capacity boiler feed water pump. After changing the seal type and wet end parts material, it can also be used as an oil transfer pump, anti-corrosive pump (DCF). This series pump has the advantage of good rigidity structure, smooth operation, long service life, high efficiency. The pump inlet and outlet are both vertical upward.
Capacity: 3.5~130 m³/h
Head: 82~1000 m
Working Temperature: ≤110 ºC
Seal Type: packing, mechanical seal
Series LDTN, LDTNA, LDTNB condensate pump
This series is a vertical, multistage, barrel centrifugal pump. The pump intake and discharge stay on the pump cylinder and discharge base respectively, which can turn 90° and 180°. The impeller is closed type, and the pump impeller for first stage pump has two types: single suction and double suction.
It is mainly used to handle condensate water in generator set system. It can also handle physical and chemical properties similar to water medium in NPSH limited or install base limited chemical process.
Capacity: 85~2600 m³/h
Head: 48~380 m
Working Temperature: ≤80 ºC
Series IH chemical pump
This series is a single stage, single suction, cantilevered centrifugal pump. It applies ISO2858 standard, is energy saving, updated product to replace F series anticorrosive centrifugal pump.
It can handle liquid which is corrosive, and viscosity similar to water in chemical process and have widely use, such as chemical, metallurgy, power, pulp, food, pharmacy and synthetic fiber fields.
Capacity: 3~450 m³/h
Head: 5~125 m
Working Temperature: -85~+105 ºC
Working Pressure: 1.6 MPa
Series MSC standard chemical process pump
This series is horizontal, single stage, single suction standard chemical pump. Its size and performance conform with DIN24256/ISO2858 standard. The performance range of this pump contains the whole IH series pumps, but with higher efficiency and better NPSH than IH pumps. This pump can be interchangeable with IH pumps.
It is used to handle low temperature or high temperature, neutral or corrosive, clean or solid contained liquid.
Capacity: ~2000 m³/h
Head: ~160 m
Working Temperature: -80~+300ºC
Working Pressure: ~2.5 MPa
Series MZA, MZE, MZF, MZU standard chemical process pump
This series is horizontal, single suction, single stage, spiral casing, radial profile, cantilever chemical process pump. Series MZA is basic angle support and series MZE, MZF, MZU is central line support. It applies standard API610 or ISO2858.
It is used to handle low temperature or high temperature, neutral or corrosive, clean or solid contained liquid and has the feature of high efficiency, low NPSH, high working temperature, running smoothly, low noise and gentle performance curve.
Capacity: ~2600 m³/h
Head: ~300 m
Working Temperature: -80~+450ºC
Working Pressure: ~13.5 MPa
Series GY, GYU convenient disassembly pipe oil pump
This series is single stage, single suction, vertical centrifugal pump, pump casing is radial profile. It applies API610 standard and is the standard pump type of OH3.
It handles clean water, petroleum contains small amount of solid, liquefied gas or corrosive medium and has the feature of high efficiency, small vibration, low noise, long service life and wide range of use.
Capacity: ~3000 m³/h
Head: ~200 m
Working Temperature: -35~+105ºC
Working Pressure: 1.6MPa
Series MSM chemical process pump
This series is horizontal, double suction, single stage, spiral case, axial profile, supports at both ends, centrifugal pump. It applies the standard API610 or ISO2858, is the standard pump type of API610-BB1.
It is suitable for handle heavy duty, large capacity, high head, high temperature, neutral or corrosive liquid, especially crude oil transportation of oil pipeline. It is widely used in petroleum, chemical, liquefied petroleum gas areas and has the feature of high reliability, long service life and high efficiency.
Capacity: ~8000 m³/h
Head: ~250 m
Working Temperature: ~200ºC
Working Pressure: ~5 MPa
Series AY, AYS heavy duty large centrifugal oil pump
This series is single stage (or double stage), double suction (or single suction), supports at both ends large centrifugal oil pump. Pump casing is radial profile, and it applies API610 standard and is the standard BB2 pump type.
It is suitable to handle clean or slight oil contain solid medium and it is widely used in oil refining, chemical industry and other hydrocarbons industrial field.
Capacity: ~10000 m³/h
Head: ~450 m
Working Temperature: -45~+450ºC
Working Pressure: ~5 MPa
Series KY, KSY, KDY horizontal split centrifugal oil pump
This series is horizontal split centrifugal pump, applies API610 standard, is the standard BB1&BB3 pump type. Pump casing is axial profile and have two installation method: basic angle and central line.
This kind of pump has the feature of compact structure, high efficiency, wide range of high efficiency area, better NPSH and running smoothly. They are widely used boiler feed water, diversion project, oil refining, chemical industry and other hydrocarbons industrial field.
Capacity: 25~8000 m³/h
Head: 60~1500 m
Working Temperature: -40~+200ºC
Series MMC multistage sectional form, centrifugal pump
This series is single suction, multistage, sectional form centrifugal pump, API610-BB4 pump type. Pump Intake horizontal or vertical upward, pump discharge vertical upward. It handles clean, corrosive or non corrosive liquid in high pressures, but not suitable for abrasive liquid. It has the feature of high efficiency, low NPSH.
Capacity: ~700 m³/h
Head: ~1400 m
Working Temperature: -50~+210 ºC
Working Pressure: ~15 MPa
Series MHB chemical process pump
This series of pump is horizontal, single suction for first stage or double suction, double casing for multistage, radial profile, supports at both ends, complete or partial out, barrel centrifugal pump. This pump applies the standard API610 or ISO2858, is the standard pump type of API610-BB5.
It is suitable to high temperature, high temperature or low temperature, neutral or corrosive liquids. It is widely used in petro, chemical, liquefied petroleum gas areas and has the feature of high reliability, long service life and high generalization.
Capacity: ~1000 m³/h
Head: ~2500 m
Working Temperature: -29~+450ºC
Working Pressure: ~25 MPa
Series MVB chemical process pump
This series of pump is suspended, multistage, double casing, barrel centrifugal pump. Pump casing is radial profile which is designed for low NPSH. This pump applies the standard API610 or ISO2858, is the standard pump type of API610-VS1&VS6.
It is suitable to handle clean or slightly polluted, high temperature or low temperature, neutral or corrosive liquids. It is widely used in petro, chemical, liquefied petroleum gas, pipeline pressure areas and has the feature of high reliability, long service life and low NPSH.
Capacity: ~800 m³/h
Head: ~800 m
Working Temperature: -180~+180ºC
Working Pressure: ~10 MPa
Series MYW chemical process pump
This series of pump is vertical, single stage, double suction (or single suction) centrifugal sump pump. It is suitable for big capacity, high head liquid handles. It applies the standard API610 or ISO2858, is the standard pump type of API610-VS2.
This kind of pump use for handle waste water, sea water, chemical medium in big capacity, such as sea water desalinization, power plant circulating water, chemical liquids, industrial water, waste water disposal for domestic water and industrial water.
Capacity: ~10000 m³/h
Head: ~200 m
Working Temperature: ~200ºC
Working Pressure: 1.6~2.5 MPa