How to use and care for sprinkler tires
How to use and care for sprinkler tires Choosing the right new tire for your car is important, especially for sprinklers, when you consider what your tyres need to get, you need to consider factors such as performance, price, brand, comfort, aesthetics and safety. But how do you know which one is the most needed tire for your car tire? A good tire can give us a safety and confidence. In November, temperatures dropped and cold weather had arrived. At this time, the importance of tires was self-evident. The aging period of tires was 3-5 years according to international practice, and the aging period of Michelin tires was 5 years. The production period until the new car really uses this “placement period†cannot exceed the aging period, otherwise it should be disposed of. 2 The driver shall inflate the tires in accordance with the provisions of the depot. When the tire pressure is lower than the standard value, the tire shoulder wear increases sharply; when the tire pressure is higher than the standard value, the tire ground contact area decreases, the unit pressure increases, so that the middle tire tread wear increases, while increasing the tire rigidity Therefore, the dynamic load on the wheels is increased and the carcass bursts easily. 4 Be not too aggressive in starting. Avoid frequent use of brakes and emergency brakes to avoid tread wear due to tires and ground drag. Be appropriate when turning vehicles, overtaking, crossings, narrow roads, railroad crossings, etc. The speed of the vehicle should also pay attention to the dynamics of the road surface, pedestrians, and vehicles, be prepared for braking, reduce frequent braking, and avoid emergency braking, thereby reducing tire wear. Pmp Reducer,Zf Reducer Series,Bonfiglioli Reducer,Custom Bonfiglioli Reducer Jinan Voton Machinery Equipment Co., Ltd , https://www.votonmachinery.com
Experts recommend that you check your tire every 2-4 weeks.
Steps/ methods 1 Regularly check the surface of the tire for defects such as cracks and deformation. The groove of the tire gradually becomes lighter due to wear and tear. If it wears flat, it will lose the effect of drainage and anti-slip. The performance of the car will be greatly reduced, and the seemingly small cracks are the hidden dangers of puncture at high speeds. Also pay attention to the timely removal of small stones in the groove.
3 The pattern of tires is usually symmetrical, asymmetrical and single-direction. Symmetrical or asymmetric pattern tires are transposed in accordance with the front wheels during transposition. The rear wheels of the sprinkler are transposed in the same direction. The order is the front left → Right rear, front right, left rear, left rear, left front, right rear, right front. In addition, the asymmetric pattern tires are divided into inner and outer sides at the time of safety rotation, and the inner and outer parts of the tire have inner side and outer side. When the tire is attached, it is possible to pay attention to the outer side and the outer side.
5 The pressure of the two left and right front wheels (driving wheels) should be especially consistent. So how do you check? Time: Check the tire pressure (including the spare tire) and check it at least once a month. Always follow the advice of your sprinkler's inflationary pressure or the location of the tire information label in the glove box or driver's door jamb position. Do not use inflationary pressure to shape the sidewall of the tire, which is the pressure required to achieve the tire's rated load capacity, which may or may not be the correct pressure for your particular vehicle.
6 Most people don't know that in fact, wear resistance is a basic indicator of a tire. Unlike its size, load-bearing, and speed grades, the wear index is not identified in the tire's shoulder, perhaps because of wear resistance. The index does not directly affect installation as it does with other indicators above, or it poses a direct threat to safety.
Precautions Attached to the hose end of the tire valve, it should be 'clicked' into place. If there is a problem with the connection, a strong hand will be enough to keep it in place. The machine will automatically detect your sprinkler tire pressure and inflation/deflation accordingly.
Usually beeps three times. Inflation should be in accordance with the instructions of the car or tire manufacturer. Regular inspection of air pressure is helpful for extending the service life of tires and avoiding anchoring. It should be reminded that the measurement of tire internal pressure should be performed at room temperature.