Buy a special car (special vehicle) skills

Buy a special car (special vehicle) skills

Xia Gong Chu Sheng (Hubei) Special Automobile Manufacturing Co., Ltd. Sales Manager Wang, according to years of experience to share with you to buy some cars (cars, special cars) skills. Articles from.
The first step: look at the chassis and battery.
You said, the new car has a good look? Wrong, the new car also leaked! Look at the lower part of the car to see if there is no oil point, there is no oil on the chassis; the new car battery has nothing to look for, just to see if the joint is corroded and if the small window is green. Note that the battery connector is generally loose and must be tightened before driving away.
Step 2: Pull out the oil dipstick to see the oil color.
Does anyone have to say that not all 0 km? What is good looking? The dealer was bad. Some cars ran for many kilometers, but the odometer did not answer, or more than ten kilometers. Look out for the car to turn off after three minutes. Pull out the dipstick and wipe it with a paper towel. Obsolete.
Step 3: Listen to the sound of the engine.
This can only be felt. The operation method is to hold two cars, you stand in the middle position, and leave the two cars at an equal distance. You feel that the sound is loud (it is obviously bigger than other cars). You can turn around and listen again, so as not to bother your ears. Different mistakes.
Step 4: Listen to the sound of the engine.
As long as the car is opened for the first time, it should open the front cover. Using a screwdriver, one end should be on top of the engine, and the other end should be on the ear to hear the sound. This is to accumulate experience. The more serious your dealer is, the less you dare to sloppy.
Here to explain in detail, so that you can hear the noise inside the engine noise, such as ring sound, knocking sound, valve squeak and so on. A good engine has only one kind of "snoring" sound and there will be no other noise. However, this method depends on the accumulation of experience that is usually carried out consciously. It is unclear to say a word or two. In short, it is better to listen to more cars.
Luo Xiaoyi: When someone can help, ask him to step on the accelerator and increase the engine speed. You listen to the sound again. Then ask him to block the exhaust with a block of rags. If the engine's sound becomes noticeably heavy and it turns off in a few seconds, that's a good car! Otherwise what is the leak.
Step 5: Check the workmanship, depending on the connection status of each thread, whether there is shaking, etc. This will all you see on your own, not much to say.
Step 6: Look at the appearance of the entire vehicle.
Some people may say that you only look at the appearance at this time? Of course, this is not picking used cars, if there is a scratch on the appearance, this car will not stop there waiting for you to pick up, dealers will be dealt with early, I want you to see the appearance of the door gap is not equal. In addition, look at the appearance of the glass is not the original match, there are marks on the glass under the feet, so as to avoid the result of your careful selection is the car had an accident car (this is not not happened).
To add that the small JS can basically handle the seamless, not very careful observation is invisible, but the accident, such as injury to the tires, as long as the JS does not change, there is no way to repair, so it should focus on If there is any damage on the tire, the car will not be considered immediately!
Step 7: At this time, when you enter the driving compartment, the dealers say that if you see it, you can't wait to pick a car in the cockpit. Most afraid of that kind of turn around the machine does not enter the cockpit for a long time. There is nothing to say here. Check whether the various buttons and switches are valid for the instructions. The lighting, audio, air conditioning, seats, seat belts, power windows, etc. are subject to an irritating test. Don't listen to the dealers, they always tell you "rest assured that they are all new cars! What's the problem?"
The emphasis is on the selection of clutches and brakes. Since many dealers are not allowed to test cars nowadays, they can hardly be selected.
1. When you are in a cold car: Step on the various gears of the clutch. Make sure that all files are smooth.
2, when the cold car: step on the clutch to hang the various files, and then release the clutch request to pick the file. Some of the stalls are too loose for the clutch. This is the contrast between cars and cars.
3, when the hot car (many dealers are not allowed to pick the car when the engine hot car file, regardless of him, insist on doing so! Repeat 1 program.
4, when the hot car does not hang the file, slam on the brakes, be sure to carefully understand the brake pedal can step on the depth changes! The same depth is required for the next time, but you cannot step on the bottom, otherwise you will have to adjust it.
For the steering gear, there is really no way, the dealers do not let the test does not let the direction of the original place, my car was later found that the belt was killed in the direction of a belt, a regular maintenance adjustment, but it is said that Chery was killed in the direction of Very few also do not care.
Well, if you really follow these steps, you can basically guarantee that your car is not a big problem. When you pick a car, you must pay attention to your eyes, ears, and hands! It's good to watch more and hear more. It's hard to get up. When you come up, you're very excited and you have your own car. It's broken.

Gas valves for use with natural gas, manufactured gas, mixed gas, liquefied petroleum gas and LP gas-air mixtures.

JKLONG Gas valves are produced in modern factories used exclusively for valve manufacturing. Each phase of the manufacturing process, from selection of raw materials to casting, forging, machining, assembly and testing, has been improved with automated production facilities and unparalleled production technology. Standardization and automation yield JKLONG brass valves of superior quality and higher uniformity at competitive prices supported by incomparably prompt delivery.

Brass Gas Valve

Gas Valve,Brass Gas Valve,Brass Gas Ball Valve,Leak Proof Gas Valve

Ningbo Jiekelong Precision Manufacturing Co., Ltd. , http://www.jklvalve.com