The use of heating tubes is very common and is currently used in many industries, especially in the industrial sector. In the process of using the heating pipe, it will inevitably encounter some problems. If it is not solved in time, it will certainly not be able to operate the device normally. Then how to repair and solve the problem after the failure of the heating pipe? We look at the professional technicians to share the maintenance skills for everyone.
According to the practice of the staff, the following situations may be encountered during the use of the equipment.
First, the device cannot start normally. There is a problem, the staff must not be anxious, can not normally start because most power supply is abnormal, so we should first check whether there is an abnormal phenomenon at the power interface. If there is no problem with the power supply, check the attention in other places, such as whether the temperature display regulator is set during the setting, whether the switch is normal, whether the signal of the operation command is normal or not. All the reasons that may cause failure to start properly should be investigated one by one.
Secondly, how is it that the heating tube suddenly turns off during operation? This phenomenon is also relatively common. The biggest problem that causes this phenomenon is the occurrence of a short circuit, or because the voltage is too high and the power supply cannot withstand it. phenomenon. To solve the short circuit is very simple, directly remove the short-circuit heating tube.
Third, the power indicator of the heating tube is off, and the display is not displayed. It should be checked whether the air switch is closed or if there is a fault in the control circuit.
The use of heating tubes will certainly cause some problems. The key is to learn how to solve them. The staff should also do maintenance work at ordinary times, such as the cleanliness and hygiene of the equipment, whether there is dirt in the inner wall of the pipeline, and it can be normally used in a timely manner to achieve uniform heating. Effect. If the parts of the equipment are loose, they should be tightened in time and the replaced parts must be replaced in time.
There will certainly be many problems in the process of using the heating pipe . However, after the proficient operation of the staff, I believe that it is easy to solve the problem. I also introduced some troubleshooting methods to the staff. Everyone can refer to it and hope to help solve problems easily. . The scope of use of heating pipes will become more and more extensive and bring greater value to users.
Introduction
Extruded Rice Powder Nutrtional Baby Food Processing Machine uses rice, corn, beans and all kinds of grains as raw materials .
Through extruding, inflating, drying, crushing and mixing, it could produce many kinds of nutrition powder, such as baby rice powder, sesame paste, beans powder and so on . This line could finish all the process automatically from the feeding to the end .
It has features of easy operation, no leak of powder dust, sanitation, energy-saving and adding all kinds of raw materials and nutriment easily .
Flow chart
Mixing materials - Extruding - Drying - Grinding - Blending with nutritional elements
Nutrition Powder Extruding Line
Cereal Powder Infant Rice Production Line,Baby Nutrition Powder Processing Line,Cereal Powder Extruder Machine,Instant Nutrition Cereal Powder Machine
Jinan Darin Machinery Co., Ltd. , https://www.globaldarin.com