Safety preparation before cast iron inlaid copper gate
Doors And Windows Aluminum Profile aluminium profile for door,aluminum profile for doors,aluminium section door Guangdong Huachang Group Co., Ltd. , https://www.gdhcaluminum.com
Prior to the operation of hoisting machines with cast iron inlaid copper gates, it is necessary to conduct a comprehensive inspection to check the integrity of the equipment and check that the built-in components are properly installed. In many cases, some dangerous accidents have been seen. The larger cause is due to the fact that no inspections were conducted prior to work and that there should be no problems, resulting in loosening of the internal bolts, insufficient lubrication, or other causes. Failures in operation result in unnecessary losses and injuries.
Cast iron inlaid copper gates only ensure that the organizational components of the equipment are consistent, and that they are tightly connected to ensure stable operation. In the use or production scenario, it is also necessary to ensure that the power supply to the device is complete. When contacting the power supply, be sure to pay attention to safety. Do not use wet hands to touch the power supply to avoid electric shock accidents. Changes in the internal organization of the shutdown have resulted in operational hazards.
In the process of operating open-close machines with cast-iron inlaid copper gates, the operator must understand the relevant operational knowledge, and in the implementation of the operation, it can also improve the value of use, and thus improve the safety protection in use.