JCB Releases New Job Safety PBS System for Wheel Loaders

The work safety system was developed in cooperation with JCB and the British FCC environment and named Active Brake Guard System (PBS). When someone enters the preset equipment operation area, it will immediately activate the sound alarm in the cab and automatically implement braking. . In addition, the PBS system automatically places the transmission in the neutral gear and activates the parking brake. At the same time, a vibratory transponder placed in a safety helmet will give a warning to pedestrians in a dangerous area to prompt pedestrians to leave the dangerous area.

JCB Releases New Job Safety PBS System for Wheel Loaders

Currently, the PBS system is available on the JCB wheel loader 457 and will be used on all wheel loader models in the near future.

JCB chief innovation and development executive Tim Burnhope said: "Operating safety is of utmost importance. We are very pleased to have developed the JCB Active Brake Guard System (PBS), which will significantly reduce the threat of pedestrians and ensure the safety of workers."

The main features of the PBS system are:

The detection area outlines the restricted area around the equipment;

After receiving the danger, the vibrating helmet prompts pedestrians;

Activate the sound alarm in the cab and prompt the driver;

Automatically implement braking to reduce the risk of collisions;

Applicable to all types of industries, improve operational safety;

JCB PBS installed three antennas on the wheel loader to define the hazardous area around the equipment. The workplace is equipped with a vibrator, which is usually mounted on a helmet and worn by the staff. If someone enters the dangerous work area of ​​the equipment, the vibrating transponder vibrates and immediately reminds pedestrians.

Work site

At the same time, the vibration transponder communicates with the device, triggering an audible alarm in the cab, alerting the driver to potential danger of collision, and automatically applying braking to stop the device from moving. The event, including date, time information, etc., will be recorded in the MCU of the device to further investigate the reasons for pedestrians entering the danger zone, thereby enhancing the future site safety management level.

The JCB PBS system can realize the installation of multiple equipments on one site, especially for large-volume work areas such as waste recycling projects. However, the installation of this system requires a detailed assessment of the site's operating environment, sidewalks, traffic routes, and other factors that may affect the operation of the equipment. In addition, the PBS system is an additional auxiliary system for on-site operation safety and does not replace the standard operating safety norms and guidelines implemented in the field. (This article comes from JCB)