Hand Operate Oil Lubrication Pump

September 01, 2020

Model NO.: JYS-09-35
Warranty: 1year
Trademark: no brand
Transport Package: Carton Box
Specification: Pump body diameter 120mm
Origin: China
HS Code: 84312000
Model NO.: JYS-09-35
Warranty: 1year
Trademark: no brand
Transport Package: Carton Box
Specification: Pump body diameter 120mm
Origin: China
HS Code: 84312000
 JYS-09-35
Round Wp25# Inlet 32mm
Material   oulet 25mm
Pump body diameter 125mm Qty 10pcs
Lift 5m Inner box 36*15.5*13.8cm
Suction 1m Carton box 82*37*29cm
Rotation 70r/min G.W./N W.: 20/19kg
Flow 24L    

Operation:
1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
Use attention:
1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
   7.Can not be extracted water and acid and alkali chemical solution!
Hand Operate Oil Lubrication Pump
Hand Operate Oil Lubrication Pump
Hand Operate Oil Lubrication Pump
Hand Operate Oil Lubrication Pump
 
 JYS-09-35
Round Wp25# Inlet 32mm
Material   oulet 25mm
Pump body diameter 125mm Qty 10pcs
Lift 5m Inner box 36*15.5*13.8cm
Suction 1m Carton box 82*37*29cm
Rotation 70r/min G.W./N W.: 20/19kg
Flow 24L    

Operation:
1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
Use attention:
1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
   7.Can not be extracted water and acid and alkali chemical solution!
Hand Operate Oil Lubrication Pump
Hand Operate Oil Lubrication Pump
Hand Operate Oil Lubrication Pump
Hand Operate Oil Lubrication Pump
 

Waste Tyre Pyrolysis Equipment manufactured by Shangqiu Yilong Machinery Equipment Co., Ltd. Which company dominated in distillation and Pyrolysis Machine manufacturing since 2008.We have CE/ISO/SGS certificate,we have exported our machine to more than 50 countries.

Characteristics of Yilong Pyrolysis machine: High Quatlity reactor material, High-efficiency cooling structure to shorten cooling time,full sealed high efficiency carbon black discharging structure.

Waste Tyre Pyrolysis Equipment

Waste Tyre Pyrolysis Equipment,Waste Tyre Pyrolysis Equipment For Sale

Shangqiu Zhongming Eco-Friendly Equipment Co., Ltd. , https://www.sqzhongminggroup.com