Halogen Moisture Analyzer Operation Process
Sun Gear
The sun wheel is installed in the wheel loader drive axle wheel edge reducer, set on the half shaft, the outer teeth and planetary gear meshing, function: transfer power to the planetary gear, inner gear ring, wheel, to achieve a two-level deceleration. In some models, the sun wheel and half shaft are made into one
Supply:Loader Drive Axle Assembly, including: axle housing, Loader Reducer Assembly, Loader Differential Assembly, half shaft, wheel rim inner gear ring, planetary frame assembly, hub, Loader Rim Assembly, Loader Brake Clamp ,loader brake pads, hub and bearings, etc
What are the functions of the drive axle?
1. Increase torque and reduce speed, change the transmission direction of torque, that is, increase the torque from the transmission shaft or directly from the transmission, and reasonably distribute the torque to the left and right driving wheels;
2, secondly, the drive axle can also bear the vertical force, longitudinal force and transverse force between the road and the frame or the body, the braking torque and reaction torque;
3. The drive axle is generally composed of a main reducer, a differential, a wheel transmission device and a drive axle housing, etc. The steering drive axle also has a constant velocity universal joint.
4. In addition, the drive axle also bears the vertical force, longitudinal force and transverse force, as well as the braking torque and reaction force between the road and the frame or the body.
XCMG Drive Axle Sun Gear,Liugong Drive Axle Sun Gear,SDLG Drive Axle Sun Gear,Lonking Drive Axle Sun Gear Henan Hanfeng Construction Machinery Co., LTD , https://www.hf-loaderparts.com
1. Press the ON/OFF button to start the instrument (use the manual off mode setting as an example).
2. Open the moisture analyzer cover, place an empty sample pan flat on the sample pan support, and place the sample pan support in the weighing room to ensure that the tongue of the sample pan support fits tightly into the slot of the hood unit.
3. Press the Tare key to zero the moisture meter. A new display with the introduction will appear.
4. Place the sample evenly in the sample pan, close the lid, and the initial weight of the sample is displayed on the screen.
5. Press the Start/Stop Start/Stop button to start the drying and measuring process with the moisture analyzer.
6. After running or completing, press Display repeatedly to display different data: MOISTURE, SOLIDS, REGAIN, GRAMS and drying curve. To stir the sample, simply open the lid, stir the sample, close the lid, and the test will continue.
7. Stop the test Press Start/Stop Start/Stop to record the data.
8. Open the cover and carefully remove the sample tray holder from the heating chamber to remove the sample.
9. Press the ON/OFF key to turn off the instrument and leave the instrument in stand-by. Clean the sample pan and allow it to dry.