Condenser Cleaning Equipment Degreased Machine
SDRFL Welded series filter consists of a two-piece Filter Housing with a bolt-on cover plate. Inlet and outlet positioned at the opposite side and different position.
Connections for venting and draining and clogging indicator are all standard size. Filter elements of size 1320,2520,-15020 is twice times higher than size 1300, 2500-15000.
The dirt holding capacity and flow has increased greatly.
Filter elements are available with the following pressure stability values: BN/HC: 25 bar
P/HC: 10 bar
Wire mesh( W/HC ): 30 bar
V: 30 bar
General
Mounting: filter housing must be flexibly mounted and not fixed rigidly to the floor or used as a pipe support.
Temperature range -10℃~100℃
Pressure setting of clogging indicator
â–³Pa=2 bar-0.2 bar
Bypass cracking pressure
â–³Po=3 bar+0.5 bar
1 bar or 6 bar is available
Truck Filter,Welded Version Filter,Hydrogen Welded Version Filter,Stainless Steel Welded Version Filter Xinxiang Shengda Filtration Technique Co., Ltd. , https://www.filtrations.nl
1. Utilization of international state-of-the-art IC, microprocessor circuit, digital display, original Germany CeramTec piezoelectric ceramic chip, high precision CNC machine equipment.
2. Bakr is the first Chinese manufacturer to use full-bridge LGBT using high-power integrated power control module. The module using Germany's Seimens can resist above 80° C and high pressure.
3. Adopting High-Q transducer and adhesive bonding technology from Germany enhance the power of ultrasonic output frequency.
4. Good outlook, low defective rate, easy operation and professional style. Novel structure, high reliability, high efficiency, and low noise. Additional functions such as digital heating, thermostat, and timing etc;
5. Adoption of international state-of-the-art technology incorporating with unique bonding technology; Ensuring ultrasonic power, powerful output, never dropping vibrator;
6. Unique design of saw-teeth water overflowing to ensure proper level and that the dirt can timely be escaped;
Condenser cleaning equipment degreased machine feather
1. Utilization of international state-of-the-art IC, microprocessor circuit, digital display, original Germany CeramTec piezoelectric ceramic chip, high precision CNC machine equipment.
2. Bakr is the first Chinese manufacturer to use full-bridge LGBT using high-power integrated power control module. The module using Germany's Seimens can resist above 80° C and high pressure.
3. Adopting High-Q transducer and adhesive bonding technology from Germany enhance the power of ultrasonic output frequency.
4. Good outlook, low defective rate, easy operation and professional style. Novel structure, high reliability, high efficiency, and low noise. Additional functions such as digital heating, thermostat, and timing etc;
5. Adoption of international state-of-the-art technology incorporating with unique bonding technology; Ensuring ultrasonic power, powerful output, never dropping vibrator;
6. Unique design of saw-teeth water overflowing to ensure proper level and that the dirt can timely be escaped;
