Circuit board three anti-paint protectant
The three anti-paint is a one-component, low-viscosity acrylic resin, and the PCB circuit board three anti-paint (X-360) is a one-component, low-viscosity acrylic resin. Simple operation: It is suitable for brushing, spraying, dip coating, shower coating and Other processes. It has fast curing speed and strong adhesion to various circuit boards. It has good resistance to high and low temperature; it forms a transparent protective film after curing, and has excellent moisture, leakage, shock, dust, corrosion, salt spray, mold, anti-aging and corona resistance. 
Product performance:
1. Elimination of toxic and harmful components in resin synthesis. And the use of high-quality environmentally friendly solvents (in line with European and American environmental requirements).
2, "three defenses" performance: with outstanding "moisture-proof" performance. It also shows good "salt-proof fog" performance. In addition, since the resin does not contain oil, it has "mold proof" properties.
3, good electrical insulation performance: because acrylic has good dielectric properties, arc resistance, spark resistance, high electrical breakdown strength, and good waterproof performance, so in a humid environment, the paint film still does not lose its good Electrical resistance.
4, good temperature resistance: three anti-paint heat resistance and better than the general resin, high temperature resistance of 150 ° C, low temperature resistance of 45 ° C.
5, good chemical resistance: good chemical resistance, due to strong oxidation resistance, it has good thermal stability, anti-aging properties, can withstand a variety of different concentrations of acid, alkali, salt corrosion.
6, the process performance is good: can be cured at normal temperature or low temperature, the film is dense and bright, strong adhesion, and decorative. The application process is simple, and it can be sprayed, dip coated or brushed. The viscosity of the paint can be adjusted according to the application process without affecting the performance of the paint.
Product Usage:
Used in tropical electrical products, relays, small transformers, marine instruments, thermal instruments, precision instruments, carrier communications, electronic components protection and positive machine protection. This kind of three-proof coating is currently an excellent three-proof protective agent in China.
Use process
1. The surface treatment (de-oil, dust and impurities) should be done before the workpiece is sprayed to facilitate the combination of the three anti-paint and the workpiece.
2. Spraying process: If the spraying method is very thin, it is recommended to use ordinary air pressure gas plus spray gun if the spraying is very thin. Pour the liquid into the gun can body properly, and spray it directly after spraying.
3. Dip coating process: Dip coating parts are immersed in the glue for 10-30 seconds, slowly lift the dip coating, tilt, and the excess glue will flow naturally. The dip coating is placed on the bracket, generally dry within 15 minutes. , check the surface of the dip coating, and apply the glue without the glue.
4, brushing: according to the product scale, choose the brush correctly, the market ordinary brush can be, pour the glue into the container, and then use the brush to glue the appropriate glue to the board evenly, paint according to the required thickness frequency. After the glue is applied, the surface can be assembled or packaged. If the glue is applied twice, it needs to be dried.
Finally, be sure to pay attention to the glue from the bottle, wipe the bottle of glue, tighten the bottle cap, and store it in a cool place. If you use it again, there may be a little crust in the mouth of the bottle after opening. You can use the crust and remove it. It doesn't matter, it will not affect the normal use.
NINGBO BLUEOCEAN AUTO PARTS CO.,LTD , https://www.blueoceanautoparts.com