Chinese Manufacturer Metal Slitter and Rewinder Production Line
Double Girder Bridge Crane with hook is the widely used hoisting machinery recently. It is mainly composed of box-shape bridge, crane trolley, trolley traveling mechanism and electric control system. The load handling device is the hook.
On the girder laid rails for crane trolley to transversely move. The girder is weld with the box-shaped end girder. At the middle of the end girder and joints which are fastened with bolts for fragmented transportation of bridges. The platform is used to place trolley traveling mechanism, electric equpment and used for repair.
It has three operation models: ground, wireless remote control and cabin room. The crane can be furnished with load handling devices such as grab, electromagnetic chuck to meet the requirements of hoisting various types of materials. Crane work duty is A3~A7, the commonly lifting load is 3-250t, so it's suitable to work in factories, warehouses and freight yards, where the ambient temperature is -10℃~+40℃ and relative humidity is not more than 85%.
Double Girder Bridge Crane Double Girder Overhead Crane,Double Girder Bridge Crane,Double Beam Overhead Crane,Double Beam Crane XINXIANG DEGONG MACHINERY CO., LTD. , https://www.degongcrane.com
Chinese Manufacturer Metal Slitter and Rewinder Production Line
 
                                                   Manufacturer site of slitting line machine
                                                Whole Production Line of Slitting Line Machine
Application
The slitting line machine/steel coil slitting and rewinding machine/slitter and rewinder is suitable for the longitudinal shearing work of the metal belt material, and rewinding the narrow strip into the new roll.
The slitting machine is applied to the thickness of material from 0.2mm to 30mm, width from 300mm to 2100mm. The popular slitter rewinder machine is also applicable for cold rolled steel, tinplate, hot rolled carbon steel coil, silicon steel coil, stainless steel coil and all kinds of surface coated metal plate.Â
Technological Process
-->Material uploading Car
-->One-armed Feeding Machine
-->Leading end, Pressing end, shovel end, two rollers feeding
-->End cutting
-->Deviation Correcting
-->Slitting machine
-->Wasted strip recoiling
-->Loop
-->Strip Pre-distributing, pressing board damping, straightening tension machine
-->Recoiling, pushing arm
-->Material discharging car
-->Hydraulic control
-->Electric controlÂ
Specification sheet
Thickness
width
Roll weight
Finished width
Shearing velocity  (MAX)
Floor space; L*W
0.15-2
800-1600
30T
≥20mm
200m/min
25*10
0.5-4
800-1600
30T
≥40mm
120m/min
25*10
1-6
800-1600
30T
≥60mm
80m/min
25*10
2-8
800-2000
30T
≥70mm
60m/min
30*11
3-10
800-2000
30T
≥80mm
50m/min
35*11
3-12
800-2000
30T
≥100mm
40m/min
35*11
3-14
800-2000
35T
≥100mm
40m/min
36*11
3-16
800-2000
35T
≥120mm
35m/min
36*11
5-20
800-2000
40T
≥120mm
30m/min
38*11
Related Products
A. Cut to Length Machine
B. Rolling Mill Machine
Company Introduction
Lixing Metallurgy Machinery Co., Ltd, professionally works on production of slitter such as disk metal slitter, cable material cutter and metal band cutter, plane shear series, cold rolled steel shaper serious and bending machine with three and four rollers.
Â
Company covers 18,500m2. It can produce more than 60 cutter sets in diversified types annually. At present there are over 100 employees including 35 technicians. Our equipments reach international advancement, which are achieved by experienced and professional boasts completed processing machines and strong competence concerning technology and processing ability. It has worked on production for over 30 years.
Â
Our equipment are more economic and practical compared with equivalent imported ones. In addition we can provide quick-response and high-efficiency after-sales service and trained technical around personnel. Our products are popular around China and won unanimous appraisals from customers.
!!Please contact us if you have any inquiry
Elisa
Â
Â
Â
Â