2017 Hot Sale Js2000 Concrete Mixers for Concrete Batch Plant
Vertical Single Slide Injection Molding Machine Vertical Injection Molding Machine Vertical Single Slide Injection Molding Machine,Vertical Plastic Moulding Machine,Small Vertical Injection Molding Machine,Vertical Plastic Injection Machine Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachinery.com
FOCUS JS series of twin-shaft compulsory concrete mixer has the strong mixing ability with uniform mixing and high production output. Mixing paddles, arms and blades are made of special high chromium and high manganese alloy materials. The mixing shafts adapt anti-binding technology to prevent the cement from binding on the shafts. Shaft seals use multi-sealed structures to effectively prevent the slurry leakage. Lubricating system of the concrete mixer supplies oil to the four shaft-end respectively with four pump cores, without diverter valve in order to avoid unnecessary blocking, saving much less maintenance work.
What are the main features of FOCUS concrete mixer?
*Mixer drum
Focus concrete mixers adopt European style, good-looking and wear-resistant.
*Synchronizer
Original imported from Italy to ensure the synchronous running of mixing arms.
*Mixing blades and scale boards
Adopt high-rigidity and high-tenacity wearable cast alloy steel to prolong the service time, which also is optimized torsional and bending strength of our concrete mixer.
*Axle-end seal
Adopt original-imported parts installation to avoid cement and slurry enter in shaft-head so that extending the service life of concrete mixer.
*Observation windows
Full width access hatch allows easy access; Includes high security positive disconnect lock.
*Reducer
Reducer and oil sealing system is made by Italian BONFILIOLI, they are designed for FOCUS concrete mixer, features for long service life, lower noise and oil tightness.
*Discharging system
Hydraulic discharging system; Strong driving force, discharging smoothly; Discharging gate of the concrete mixers adopt disassemble structure, easy for reparation, the gate could be opened at each standpoint; A manual lever allows the gate to be opened in case power lost.
*Electric lubricating pump
Supplying oil to four axle-end respectively with four pump cores, without by-pass valve.
*Four-layers sealing technology
The concrete mixer applies reliable axial seal and all sealing parts are easy to be replaced, also suitable for bad work conditions for daily maintenance.
Our twin-shaft concrete mixers are being purchased, installed and operated all over the world. Thanks for visiting, by the time you are paying attention to us, our double-shaft concrete mixers are being delivered /distributed to the world everyday - it'll be such a great honor if you can join us.
FOCUS Twin-shaft Concrete Mixer Technical Parameters:
     Model
parameterJS500
JS750
JS1000
JS1500
JS2000
JS3000
JS4000
Discharge vol.(L)
500
750
1000
1500
2000
3000
4000
Charging vo.(L)
800
1200
1600
2400
3200
4800
6400
Output capacity(m³)
25
35
50-60
75-90
120
180
240
Aggregate size(mm)
80
Working circle(s)
60
Discharge height(m)
1.5-4.1 adjustable
Mixing blade
Speed
31r/min
19.5r/min
21r/min
Quantity
2x7
2x8
2x10
Mixing motor
18.5kw
30kw
37kw
2x22kw
2x37kw
2x55kw
2x75kw
Weight(kg)
4000
5500
8700
9880
10960
11130
13500
Dimension
(L*W*H)mm3030*
2300*
26804550*
2250*
24504640*
2250*
22505058*
2250*
24403810*
2480*
17104220*
2620*
19104450*
3050*
2380
Â
1. Each plastic cavity can be taken out by a simple manipulator, which is conducive to precision molding.
2. In small batch trial production, the mold structure is simple, low cost, and easy to unload.
3. It is easy to ensure the consistency of resin fluidity and mold temperature distribution in the mold.
4. After many earthquakes, the vertical machine has better seismic resistance than the horizontal machine due to its low center of gravity.
5. Equipped with rotating table, moving table and tilting table, it is easy to realize insert molding and in-mold combination molding.
6. The belt conveyor is easy to be installed in the middle of the mold, so as to realize the automatic production of molding.
7. Generally, the mold locking device is open around, and it is easy to configure various automatic devices, which is suitable for automatic forming of complex and delicate products.
8. The weight of the mould is supported by the horizontal formwork for opening and closing up and down. The phenomenon that the formwork cannot be opened and closed due to the forward fall caused by the gravity of the mould similar to the horizontal machine will not occur. It is beneficial to maintain the accuracy of machinery and mold for durability.
9. It is easy to realize the molding of the insert. Because the mold surface is upward, it is easy to put the insert into the position. The lower template is fixed and the upper template is movable. If the belt conveyor is combined with the manipulator, it can easily realize the automatic insert molding.
10. The injection device and mold locking device are located on the same vertical centerline, and the mold is opened and closed in the up and down directions. Its floor area is only about half of that of the horizontal machine, so it is about twice as productive.