Shantui Jianyou's first deep cement mixing vessel DCM put into use at the new airport in Hong Kong

Recently, China's first deep cement mixing vessel DCM was completed by Shantui Jianyou and put into operation in Hong Kong's new airport project. This is a major national construction that Shantui Jianyou has entered into the construction of the airport since he joined the Hong Kong-Zhuhai-Macao Bridge. project.

Shantui Jianyou's first deep cement mixing vessel DCM put into use at the new airport in Hong Kong

The "CCCC DCM1" construction vessel is the first deep-buried cement mixing vessel in China, and is also the first DCM vessel to enter the construction site of 3204. The ship has a total length of 60 meters, a width of 26 meters, a depth of 4.1 meters, and a pile height of 48.6 meters. It has used three sets of processor equipment for the first time in the country. The DCM ship can handle 13.92 square meters at a time, with a maximum treatment depth of up to 35 meters below the water surface. It is equipped with a series of advanced automatic detection instruments such as draft gauges, depth gauges, level gauges, and GPS. Its construction management control system has a high degree of The automation performance can realize one-click pile-making, and can be converted manually or automatically. The degree of automation has reached the world's leading level. Up to now, the construction vessel has been piled 15 to meet the construction progress requirements.

The new airport project in Hong Kong is located in the air traffic control zone of the airport. Extreme weather such as typhoon, rainstorm, high temperature, and humidity during construction is required, and environmental protection requirements are complex and stringent. The Shantui Jianyou DCM Mixing Vessel was successfully installed and worked in such a severe environment, once again demonstrating that Shantui Jianyou's mixing equipment can adapt to different operating environments with high performance, high quality, and high reliability. (This article comes from Shantui)

Related News: Shantui Mixing Boat Hong Kong

Precast Concrete Magnet

Precast concrete magnet is configured with a big neodymium block magnet in to a steel house.the neodymium block magnet is very big of size which is very large.Magnet for precast concrete, is a magnetic tool to hold concrete formwork. There are two hex bolt and a round handle button on the top of the precast concrete magnet, the hex bolt is for fixed with adapter and handle button is for push to use.

How to use precast magnet box? People who use this magnet need to find some shuttering adapter to suit the precast magnet box onto the concrete framework, this framework could be made of plywood,wood, iron steel, aluminum... Then push the round handle button on the top, the block magnet in steel box will sink and contact and catch with iron steel part. After setting the magnet to the formwork,The concrete will be formed trimly just as the precast framework likes.

If someone want to remove the concrete magnet, he need to find a crowbar and pry up the round handle button and the block magnet will return to its position and not catch the iron steel.

Using the concrete formwork magnet is very convenient, construction workers could build a concrete formwork on a ground ,and fit two hex bolt with the adapter onto the the concrete formwork. There is another means of using the concrete formwork magnet,workers could hold the concrete formwork on a hydraulic platform,build and stock the concrete walls,and using forklift and crane to carry the walls while using them.

What are the advantages of using precast concrete magnet in modern architecture construction? By using the concrete magnet, the concrete could form very trimly of sizes for building constructions. By using the concrete magnet, the construction process could be much quicker as workers could stock concrete walls and use these concrete walls to build architecture. The repute of the construction company will be much better and customer will happy to pay the money for the timely construction works. By using the magnet for precast concrete, there will be less concrete works in dangerous high situations, worker could finish their work more safely and construction could save more insurance cost and give higher salary to the workers.

By using concrete formwork magnet,the workers could save more time while build constructions, after using concrete formwork magnet, there will be less risk or danger during the constructing process. In a word, the concrete formwork magnet could enhance the speed of build while inform more security,the workers could make more money from the construction and businessman could earn more money from their business.

The concrete formwork magnet is strong magnetism,please keep the electrical product and card away from it,also, while using the concrete formwork magnet do not put your hand or feet or any part of body under the magnet,it will cause injure.

Concrete MagnetShuttering MagnetPermanent MagnetMagnet

Precast Concrete Magnet,Magnet For Precast Concrete,Concrete Formwork Magnet,Concrete Formwork Systems