Gravimetric Feeder for Colorants and Additives
Specification  Easy-to-use refractory anchor bricks. Including the anchoring brick body, the middle of the left side of the upper surface of the anchoring brick body is provided with a triangular prism-shaped hanging groove, one of the side surfaces of the hanging groove is located on the upper surface of the anchoring brick body, and one of the bottom surfaces of the hanging groove is located on the right side of the anchoring brick body. The lowermost end of the hanging groove is provided with hanging holes penetrating the left and right ends of the anchor brick body. By implementing the present invention, the following beneficial technical effects can be obtained: the hanging piece is connected to the hanging hole through the hooks on both sides, and the refractory anchor brick can be rotated relative to the hanging piece through the setting of the hanging groove, but the rotation is restricted by the hanging groove , making the refractory anchoring brick more convenient to use, improving the service life of the refractory anchoring brick and reducing the material of the anchoring brick; when the hanging piece rotates to the limit position, the hanging groove and the hook are close to each other, and the contact area is large, preventing the hanging piece and the refractory anchoring brick from being damaged. Brick Anchor,Anchors For Coolers,Refractory Brick Anchors,316 Stainless Steel Refractory Anchor Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.comSAM series masterbatch dosing machine
Constant weight feeding
Definite quantity of colour masterbatches or additives shall be added and mixed directly in the volumetric form. The excellent mixing quality can ensure consistency of color and quality of the product to the best. If the single raw material needs to be added in small dose, SAM series' constant weight feeder can meet the ideal quantitative requirements. The output varies from 195g/h to 381962g/h and HADRDEGA can recommend the more suitable screw types according to output requirements of the clients.Â
The cost as you can see
Mixed materials will not be scattered, which can save 1% to 2% materials at least;
Great savings in manpower and there is no need to mix the materials artificially;
Color and quality of the products can maintain their consistency and qualified rate of the products can be raised.
Â
Model
Single Color Unit
Double Color Unit
CM30-24S
CM30-24
CM30-20S
CM30-20
CM30-16
CM30-12
CM30-08
CM-D30/30
CM-D30/50
CM-D50/50
Motor Power(w)
30
30
30
30
30
30
030
30*2
30*2
30*2
Rev(r.p.m.)
0-3000
0-3000
0-3000
0-3000
0-3000
0-3000
0-3000
0-3000
0-3000
0-3000
Mixer Power(w)
90
90
90
90
90
90
90
90
90
90
Screw External Dia.(mm)
24S
24
20S
20
16
12
8
*
*
*
Output Capacity(kg/hr)
Â
0.8-38
Â
0.4-20
0.2-10
0.1-3
0.08 -1.5
**
**
**
Storage Capacity(L)
12
12
12
12
12
12
12
12*2
12*2
12*2
Gear Ratio
30:1
30:1
30:1
30:1
30:1
30:1
30:1
30/30
30/50
50/50
Dimensions
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
H mm
420
420
420
420
420
420
420
420
420
420
W mm
550
550
550
550
550
550
550
930
930
930
D mm
295
295
295
295
295
295
295
295
295
295
Net weight (kg)
17
17
17
17
17
17
17
30
30
30
Mixing base can maintain mixing uniformity of the materials to the greater degree. When three or more materials are used simultaneously, uniformity of the raw materials will be maintained as long as the homogenizer is used. The evenly-mixed materials can continuously maintain the stable product quality and can raise qualified rate of the products.
Reliability
SAM series' constant weight feeder is designed according to the inclined push-delivery solution, which can reduce error of gram weight of each batch of push-delivered materials and which can ensure conformity of materials of each product.
The incomplete filling warning function and the auto-stop function of molding machine controlled by incomplete filling materials can avoid the product defect losses caused by incomplete filling materials.
The two-component usage scheme and the optional homogenizer with mixing functions can ensure that the materials will be fallen into the molding machine evenly.
Â