On March 1, 2017, the official website of the Tongling Industrial and Commercial Bureau notified the quality inspection of the goods in the circulation area in the fourth quarter of 2016. Two sets of LED lamps were judged to be unqualified products. According to the report, in the fourth quarter of 2016, Tongling City Industrial and Commercial Bureau organized energy-saving lamps, LED lamps, electric blankets, etc. for 11 manufacturers in urban shopping malls, supermarkets, specialty stores, large business operators and centralized business premises. Quality monitoring of energy-saving goods. Among them, the project indicators for energy-saving lamps are mainly for signs, protection against electric shock, mechanical strength, lamp power, luminous flux, initial luminous efficacy, average color rendering index, harmonics, etc.; (trailing trough), structure (balance), structure (clamping force), external wiring (power connection method), external wiring (cross-sectional area), external wiring (cord fixing), internal wiring, insulating gasket and Casing, double insulation and reinforced insulation, insulation resistance, electrical strength, leakage current, protection against electric shock, etc.; the items of electric blankets are mainly for protection against live parts, input power and current, and leakage at working temperature. Current and electrical strength, stability and mechanical hazards, mechanical strength, construction, internal wiring, power connections and external cords, grounding measures, screws and connections. In the quality inspection of the circulation field, two sets of LED lamps were judged as unqualified products, and the main unqualified items were external wiring (cross-sectional area), internal wiring, and structure (clamping force). According to the "Tongling City Industrial and Commercial Bureau in the fourth quarter of 2016, the quality of unqualified products in the fourth quarter of 2016", a batch of HL-55724W Huaxiong LED table lamp produced by Yingke Lighting Appliance Co., Ltd., Leliu Town, Shunde District, Foshan City (2016.06), the internal wiring and external wiring (cross-sectional area) items were found to be unqualified; one batch of NSRZ-DL013D54-C12 Nostar LED table lamp (2015.12.15) produced by Wuxi Disi Microelectronics Co., Ltd. was The detected structure (clamping force) item failed. This time, 13 batches of qualified products for quality inspection were also announced. The industry and commerce department reminds consumers to pay attention to the following points when purchasing, using, and maintaining LED lamps: First, you should look at the LED lamps when you purchase them. If the product identification is complete, the manufacturer's name, address, trademark, model specification, rated voltage, rated frequency, rated power, etc. should be checked. Check whether the product model matches the model specification of the inspection report and safety certification certificate. The identification is correct; secondly, whether the power cord of the lamp has the CCC safety certification mark, the cross-sectional area of ​​the external wire should be not less than 0.75 mm2; the third is to see if the charged body of the lamp is exposed. After the light source is installed in the lamp holder, the finger should not touch the charged metal lamp cap. The second is to buy LED desk lamps for children, avoid buying metal casing lamps with high heat source, such as incandescent lamps, halogen metal lamps, metal casing lamps; at the same time, pay attention to whether the lamps are stable enough, you can tilt the lamps around 6 to see them Whether it is overturned; choose a table lamp with a higher category of protection against electric shock, such as a Class II luminaire marked with a phrasing number. Third, after buying the lamp, you should carefully check the lamp's mark and read the instruction manual before installing it. When using the LED lamp, if you find that the fluorescent tube is red at both ends and the lamp does not illuminate, you should follow the light source parameters of the mark. Replace the aging lamp in time; when cleaning and maintaining the LED lamp, pay attention to the instruction manual. In addition to removing the lamp cover cleaning lamp cavity or replacing the lamp tube, do not easily disassemble the other parts of the lamp, and at the end of cleaning and maintenance, install the lamp as it is. Tongling City Industrial and Commercial Bureau in the fourth quarter of 2016, the quality of sampling inspection unqualified products summary table Tongling City Industrial and Commercial Bureau in the fourth quarter of 2016 commodity quality inspection qualified products summary table
Anticaking Agent
Anticaking Agent,Anti Caking Powder,Anticaking Agent Powder,Organic Anti Caking Agent
Sichuan Tianyu Oleochemical Co., Ltd , https://www.sclthoil.com